Professional OPC
Development Tools

logos

lupa

Online Forums

Technical support is provided through Support Forums below. Anybody can view them; you need to Register/Login to our site (see links in upper right corner) in order to Post questions. You do not have to be a licensed user of our product.

Please read Rules for forum posts before reporting your issue or asking a question. OPC Labs team is actively monitoring the forums, and replies as soon as possible. Various technical information can also be found in our Knowledge Base. For your convenience, we have also assembled a Frequently Asked Questions page.

Do not use the Contact page for technical issues.

  1. Forum
  3. Discussions
  5. QuickOPC-Classic in .NET
  7. Connections, Reconnections, COM/DCOM
  9. In the latest version 5.71 CustomSecurity parameter not exisiting.

In the latest version 5.71 CustomSecurity parameter not exisiting.

More
15 Nov 2023 13:07 #12369 by mut9bu
Replied by mut9bu on topic In the latest version 5.71 CustomSecurity parameter not exisiting.
OK sorry now have found:

ComManagement.Instance.Configuration.SecurityParameters.UseCustomSecurity = false;

Please Log in or Create an account to join the conversation.

More
15 Nov 2023 13:06 #12368 by mut9bu
Replied by mut9bu on topic In the latest version 5.71 CustomSecurity parameter not exisiting.
Excuse me so much, but I have read all the link you sent me , but still couldn't find where the option parameter was moved.
Could you share the new location?

Please Log in or Create an account to join the conversation.

More
15 Nov 2023 11:12 #12366 by support
Replied by support on topic In the latest version 5.71 CustomSecurity parameter not exisiting.
Hello.
It is still there, it has just moved.

Read:
- kb.opclabs.com/What%27s_new_in_QuickOPC_2022.1 .
- kb.opclabs.com/COM_management
- kb.opclabs.com/COM_settings_in_OPC_Classic_client_components

I hope this helps
Best regards

Please Log in or Create an account to join the conversation.

More
15 Nov 2023 10:51 #12364 by mut9bu
In the latest version 5.71 CustomSecurity parameter not exisiting. was created by mut9bu
Hello

For the connection to some OPC DA servers we adjusted following parameter, and could establish connection.
But this parameter is not existing anymore in the Version 5.71. What can we do? We will loose connection to many OPC DA servers in this case.

EasyDAClient.SharedParameters.ClientParameters.UseCustomSecurity = false

Please Log in or Create an account to join the conversation.

Moderators: support
  1. Forum
  3. Discussions
  5. QuickOPC-Classic in .NET
  7. Connections, Reconnections, COM/DCOM
  9. In the latest version 5.71 CustomSecurity parameter not exisiting.
Time to create page: 0.055 seconds