The Compatibility Test List documents the test performed with the product with the aim to assure its compatibility widest range of systems it depends on or interoperates with. This document is updated from time to time, as new tests are being performed.
This document is grouped by the classes of systems that this product depends on or interoperates with, such as “Platform Hardware” or “Operating Systems”. Each class has a standalone chapter.
The entries in each group are sorted by the columns from left to right, i.e. first by “Other System Model”, then by “Other System Version”, and then by “Test Date”.
“Other system” is the system we are testing the compatibility of this product with. It can be hardware, software, or a combination.
This field contains additional details about the other system, typically its versioning information, if available.
Describes when the test was performed. It can be a specific date, date range, or approximate date such as a month in a year.
This field determines the entity (person or organization) that has performed the test.
This field contains versioning information about this (our) product, typically including the software build and revision numbers, too.
If a test that was otherwise identical in other parameters has been performed with a newer version of this product, and the outcome was the same or better, the old entry in the compatibility test list may be removed for brevity. This is done so because the main purpose of the compatibility test list is to assess the compatibility of the latest available version of this product.
On the other hand, entries for tests performed with earlier versions of this product that were not repeated later are always retained. It can be assumed that later versions of this product continue to operate with at least the same outcome as the version that has been tested.
· Alpha Test.
· Basic Test.
· Beta Test.
· Compliance Test.
· Developer Test.
· Field Test: Test under the conditions under which the product will actually be used.
· Interoperability Workshop.
· Failed. There is always a Note describing the details.
· Inconclusive. There is always a Note describing the details.
· Passed.
· Warning. There is always a Note describing the details.
This field contains any relevant notes, especially to the test environment, or outcome of the test.
|
Other
System Model |
Other
System Version |
Test
Date |
Performed
By |
This
Product Version |
Test
Type |
Test
Outcome |
Notes |
|
Intel Pentium 4
CPU, 2.60 GHz, 1 GB RAM |
|
2010-09 |
OPC
Labs |
1.00.408.1 |
Developer
Test |
Passed |
WXP
SP3 |
|
Intel Core 2 CPU, 1.83
GHz, 2 GB RAM |
|
2010-09 |
OPC
Labs |
1.00.408.1 |
Developer
Test |
Passed |
WXP
SP3 |
|
Intel Core 2 CPU
6600, 2.40 GHz, 2GB RAM |
|
2011-01-30 |
OPC
Labs |
1.02.56.1 |
Developer
Test |
Passed |
W7/x64 |
|
Intel Core 2 Quad
CPU, 2.40 GHz, 4 GB RAM |
|
2010-09 |
OPC
Labs |
1.00.408.1 |
Developer
Test |
Passed |
W7/x86 |
|
Intel Xeon CPU 3060
@2.40 GHz, 2 GB RAM |
|
2011-01-30 |
OPC
Labs |
1.02.56.1 |
Basic
Test |
Passed |
WS2008R2/x64 |
|
Intel Xeon CPU, E5420
@2.50 GHz (2 processors), 1 GB RAM |
vm |
2010-09-27 |
OPC
Labs |
1.00.412.1 |
Basic
Test |
Passed |
WS2003
SP2/x86 |
|
Intel Xeon CPU, E5420
@2.50 GHz (2 processors), 2 GB RAM |
vm |
2010-09-27 |
OPC
Labs |
1.00.412.1 |
Basic
Test |
Passed |
WS2008
SP1/x86 |
|
Other
System Model |
Other
System Version |
Test
Date |
Performed
By |
This
Product Version |
Test
Type |
Test
Outcome |
Notes |
|
Microsoft Windows XP
Professional |
SP3
(English) |
2010-09 |
OPC
Labs |
1.00.408.1 |
Developer
Test |
Passed |
|
|
2011-01-29 |
OPC
Labs |
1.02.56.1 |
Basic
Test |
Passed |
|
||
|
Microsoft Windows
Server 2003 R2 Standard Edition |
x86
SP2 (English) |
2010-09-27 |
OPC
Labs |
1.00.412.1 |
Basic
Test |
Passed |
|
|
Microsoft Windows
Server 2008 Standard Edition |
x86
SP1 (English) |
2010-12-11 |
OPC
Labs |
1.01.461.1 |
Basic
Test |
Passed |
|
|
Microsoft Windows
Server 2008 R2 Standard Edition |
x64
(English) |
2011-01-31 |
OPC
Labs |
1.02.56.1 |
Basic
Test |
Passed |
|
|
Microsoft Windows 7
Enterprise |
x86
(English) |
2010-09 |
OPC
Labs |
1.00.408.1 |
Developer
Test |
Passed |
|
|
x64
(English) |
2011-01-29 |
OPC
Labs |
1.02.56.1 |
Developer
Test |
Passed |
|
|
Other
System Model |
Other
System Version |
Test
Date |
Performed
By |
This
Product Version |
Test
Type |
Test
Outcome |
Notes |
|
Johnson Controls
DX-9100 Extended Digital Plant Controller |
Rev.
2.x |
2010-09 |
OPC
Labs |
1.00.408.1 |
Developer
Test |
Passed |
|
|
Johnson Controls MR40 Advanced Electronic Control for
compressor and defrost management |
|
2010-09 |
OPC Labs |
1.00.408.1 |
Developer Test |
Passed |
|
|
IME NEMO 96/35
Multimeter |
|
2010-08 |
reseller |
1.00.407.1 |
Beta
Test |
Passed |
|
|
Other
System Model |
Other
System Version |
Test
Date |
Performed
By |
This
Product Version |
Test
Type |
Test
Outcome |
Notes |
|
Standard
communications port (with 16550 compatible UART) |
|
2010-09 |
OPC
Labs |
1.00.408.1 |
Developer
Test |
Passed |
|
|
Advantech ADAM-4561 1-port Isolated USB
to RS-232/422/485
Converter |
driver
version 1.1.0.0 |
2010-09 |
OPC
Labs |
1.00.408.1 |
Developer
Test |
Passed |
RS-232 |
|
Other
System Model |
Other
System Version |
Test
Date |
Performed
By |
This
Product Version |
Test
Type |
Test
Outcome |
Notes |
|
Lantronix UDS1100 |
firmware
v6.6.0.1 |
2010-09 |
OPC
Labs |
1.00.408.1 |
Developer
Test |
Passed |
|
|
MOXA NPort 5150 |
Rev.:
1.0 |
2010-12 |
OPC
Labs |
1.00.401.1 |
Developer
Test |
Passed |
TCP
Server Mode |
|
Other System Model |
Other System Version |
Test Date |
Performed By |
This Product Version |
Test Type |
Test Outcome |
Notes |
|
FactorySoft OPC Inspector |
1.1 (1998) |
2010-09-21 |
OPC Labs |
1.00.410.1 |
Basic Test |
Warning |
Note 1 |
|
INAT Softcollect OPC Client |
1.02 |
2010-09-20 to
2010-09-24 |
INAT GmbH |
1.00.410.1 |
Interoperability
Workshop |
Passed |
DA2 |
|
Inductive Automation Ignition OPC-COM |
1.1.6 |
2010-09-20 to
2010-09-24 |
Inductive Automation |
1.00.410.1 |
Interoperability
Workshop |
Passed |
DA3 |
|
Indusoft Web Studio |
7.0 |
2010-09-20 to
2010-09-24 |
Indusoft Ltd |
1.00.410.1 |
Interoperability
Workshop |
Passed |
DA3 |
|
Kepware OPC Quick Client |
V4.70.95 - U |
2010-09-21 |
OPC Labs |
1.00.410.1 |
Basic Test |
Passed |
|
|
MSIndustrie Software MSI-NICE |
1.1.0.16 |
2010-09-20 to
2010-09-24 |
MSIndustrie Software
GmbH |
1.00.410.1 |
Interoperability
Workshop |
Passed |
DA3 |
|
OPC Foundation CTT (Compliance Test Tool) |
2.15.1152, DA 2.05a (2.0.20.1156) |
2010-09-28 |
OPC Labs |
1.00.413.1 |
Compliance Test |
Passed |
|
|
2.15.1152, DA 3.00 (1.0.16.1156) |
2010-09-28 |
OPC Labs |
1.00.413.1 |
Compliance Test |
Passed |
|
|
|
OPC Foundation UA COM Wrapper |
1.01.321.0 |
2010-09-20 to
2010-09-24 |
OPC Foundation |
1.00.410.1 |
Interoperability
Workshop |
Passed |
DA3 |
|
OPC Foundation UA Sample Client |
1.01.320.0 |
2010-11 |
OPC Labs |
1.01.455.1 |
Basic Test |
Passed |
UA |
|
SAP PCo |
2.1.3.0 |
2010-09-20 to
2010-09-24 |
SAP |
1.00.410.1 |
Interoperability
Workshop |
Passed |
DA2 |
|
Siemens OPC Scout |
V8.0 SP1 |
2010-09-20 to
2010-09-24 |
Siemens AG |
1.00.410.1 |
Interoperability
Workshop |
Passed |
DA3 |
|
Simatic WinCC |
7.0 / Sp 2 |
2010-09-20 to
2010-09-24 |
Ing.-Buero
Allmendinger |
1.00.410.1 |
Interoperability
Workshop |
Passed |
DA3 |
|
Softing OPC Collector |
2.01.00.5734 |
2010-09-20 to
2010-09-24 |
Softing AG |
1.00.410.1 |
Interoperability
Workshop |
Passed |
DA3 |
|
Softing OPC Toolbox Test and Demo Client |
4.20.00.0841 |
2010-09 |
OPC Labs |
1.00.408.1 |
Developer Test |
Passed |
|
|
4.22.07.2363 |
2010-09-20 to
2010-09-24 |
Softing AG |
1.00.410.1 |
Interoperability
Workshop |
Passed |
DA3 |
|
|
Unified Automation UA Gateway |
1.0.1 |
2010-09-20 to
2010-09-24 |
Unified Autom. GmbH |
1.00.410.1 |
Interoperability Workshop |
Passed |
|
|
Unified Automation UA Link |
0.9 |
2010-09-20 to
2010-09-24 |
Unified Autom. GmbH |
1.00.410.1 |
Interoperability
Workshop |
Passed |
DA3 |
Note 1: The client only supports OPC-DA 1.0, while this server supports OPC-DA 2.0 and 3.0. Consequently, most OPC operations, including browsing, reads and writes, work correctly, but OPC subscriptions do not work.
Mark "Johnson Controls" and mark "Metasys" are owned by Johnson Controls, Inc. and/or its affiliates.
OPC Labs, s.r.o. is not associated with Johnson Controls.
Johnson Controls has not provided any assistance in developing this product,
and have not made determination that the server is compatible with Johnson
Controls' products.